• kuyu
      • terfi
      • sürücü
      • verimlilik
      • sıcaklık
      • hmi
      • oransal
      • aktuatör
      • klor

        The Specifications of the PLC Controller:• 9 channel 24VDC PNP/NPN input
        • 6 channel 230VAC 5A relay output
        • 1 channel 0-10VDC/0-20mADC optional analog input (12-bit resolution)
        • 1 channel 0-20mADC analog output (14-bit resolution)
        • Can be expanded by maximum 16 expansion units due to the modular structure
        • Communication over the network via a 100MBit ethernet port
        • MODBUS TCP support
        • RS232 ve RS485 communication ports
        • MODBUS RTU support
        • Decimal operation support
        • 12ns processing speed
        • RTC (Real Time Clock)
        • Supplied by 24VDC
        • Power Consumption < 3W
        • Working temperature between 0°C and +50°C
        • Can be programmed with Ladder Logic Diagram Editor
        Digital expansion module:• 8 channel 24VDC digital input
        • Inputs are isolated and can be used as PNP and NPN
        • 8 channel 230VAC 5A relay output
        Power Supply:• 5A, 120W SMPS
        • 24VDC Output, 100-240VAC or 90-350VDC Input
        • Efficiency %88
        • Over power protection, over voltage protection
        • Working temperature between -25°C and +60°C
        Uninterruptible Power Supply:• DC UPS
        • Input 22.5V-28V, Output 24V
        • Output current 30A
        • At least 7 Ah 12V dry accumulator
        • Working temperature is between -40°C and +70°C
        GSM Communication:• 3G Industrial Router
        • Communication speed; 3G 14.4Mbps, 2G 236.8 Kbps
        • IEEE 802.11b/g/n, can be used as Wifi access point or station
        • 2 Ethernet ports
        • Routing, network protocols, firewall, DHCP, QoS, network backup, load balancing, DDOS prevention,
        port scanning prevention, WPA-2Ent Wifi
        encryption, mobile quota control, web filters, access control, VPN, APN
        • RutOS: Linux-based operating system
        • 1 digital input, 1 digital output
        • Operates with 9-30VDC
        • Power consumption < 5W
        • Working temperature is between -40°C and +75°C
        Energy Analyzer:• The measured parameters are: 3xV, 3xI, Frequency, W, Var, VA, kWh, kVarh, Min, Max, Demand, Cos φ
        • RS485 Modbus RTU Communication
        • LCD Screen
        • Sensitivity %0.5
        • Power Consumption < 4W
        • Working temperature is between -10°C and +55°C
        HMI Screen:• 7” TFT 800x480 Touchscreen
        • 32bit 800Mhz Processor
        • 128MB Flash, 64MB SDRAM,
        • RTC
        • USB, RS232, RS485 Port
        • Ethernet, Modbus TCP
        • Remote desktop support with VNC
        • Power consumption < 7.2W
        • Working temperature is between 0°C and +50°C
        Temperature Sensor:• 4 independent universal inputs
        • 15-bit resolution, 0.1°C accuracy
        • Input types: PT-100 or PT-1000 type RT (Accuracy at full scale %0.2); B, C, E,J,K,N,R,S and T type thermocouple (accuracy at full scale %0.2); 25°C
        @10kOhm NTC (Accuracy 0.2°C); 0...60mVDC (0.01mV accuracy)
        • Short circuit and current protection
        Analog Expansion Module:• 4 Channel 0-10VDC, 0-20mA, 4-20mA analog input
        • 2 Channel 0-10VDC, 0-20mA, 4-20mA analog output
        • The channels can be used as different input/output types independent of one another
        • Inputs and outputs are isolated by galvanization
        • 14-bit resolution
        Panel Specifications and Dimensions:• PVC 50x70x25 cm
        Panel Weight:• 16,20 Kg


        Where can I use this product?• Drinking Water
        • Agricultural irrigation
        • Management of Process water
        • Chlorine dosing
        In what kind of stations, I can use this product?• Well Pump Control
        • Lift Pump Control
        Automatic Operating Scenarios• Can work automatically depending on the linked water reservoir (Koru1000 Link)
        • Can work as booster pump (hydrophore mode)
        • Can work according to a time table
        Sensor supportUp to 8 analog sensors can be connected:
        • Flowmeter
        • Input pressure, output pressure, line pressure
        • Ground water level, reservoir level sensors
        • Remaining chlorine
        • Turbidity
        Temperature sensor4 different temperature sensors can be connected ( for panel, motor, environment, water temperature)
        What happens when the communication is interrupted?Works automatically according to the determined time periods
        Touchscreen on the panelYes (7” TFT)
        Energy tracking featureYes
        Pump efficiency calculationYes
        Driver (frequency convertor) supportYes (Adaptive PID can be performed with respect to pressure, flow, ground water level or power.)
        Actuator valve controlYes (1 3-phase actuator)
        Chlorine dosing pump controlYes
        Functional inputs and outputsYes (3 piece)
        Hardware upgradeable?Yes
        7/24 system supportYes
        Software supportIntegration to the Koru1000 water management system over Koru1000 cloud.
        External SCADA supportIntegration to all SCADA systems that supports Modbus TCP

        Copyright@2018, ENVEST. | All Rights Reserved.